Ventilation

Roof Ventilator for tiled roofs

  • Base 405mm x 440mm, cap 293mm x 210mm
  • Airflow rating 15,000mm2.
  • PVCU/foam/aluminium.
  • Cap available in brown, terracotta or grey.
  • Suitable for new and refurbishment work.
  • Integral grille/screening.
  • Suits wide range of tiles.
  • Not recommended for Redland Delta, Cambrian, Saxon, Richmond. Anchor Centurion. Marley Monach. Clay pantiles. Slate. Always determine suitability. Double lap plain tiles require slight modification.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

The universal tile ventilator is designed for use with tiled roofs. Compatible with many styles of interlocking profiled tiles and plain tiles, the universal ventilator may normally be used on roof pitches from 20 degrees up to 70 degrees. This ventilator promotes an air throughput rating of 15,000mm2, through an insect resistant integral screen. An optional adaptor permits the ventilator to be connected to a standard 100mm pipe if required.

Use

Sloping roof ventilator for use at high or low level.

Data

  • Base 405mm x 440mm, cap 293mm x 210mm
  • Airflow rating 15,000mm2.
  • PVCU/foam/aluminium.
  • Cap available in brown, terracotta or grey.
  • Suitable for new and refurbishment work.
  • Integral grille/screening.
  • Suits wide range of tiles.
  • Not recommended for Redland Delta, Cambrian, Saxon, Richmond. Anchor Centurion. Marley Monach. Clay pantiles. Slate. Always determine suitability. Double lap plain tiles require slight modification.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards