Ventilation

Type REV Refurbishment Eaves Ventilator

  • PVC, clear or black.
  • Now available in two sizes.
  • REV600 for 600mm rafter spacing.
  • REV400 for 400mm and 450mm rafter spacing.
  • Suits numerous truss spacings.
  • Excellent free airflow.
  • Compatible with other ventilators.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

The refurbishment eaves ventilator fits between rafters and can be placed in position from within the attic space. The ventilator bottom portion rests under the insulation. The ventilator top hinged portion hinges to follow the roof line. Its simple shape allows air to travel to and from the roof void. Insulation is not permitted to close the gap between the truss rafters. (Note: In existing properties air entry is normally introduced through the existing soffit. Please see CSV circular soffit ventilators or RSV rectangular soffit ventilators which may be used with this refurbishment eaves ventilator.)

Use

Preformed eaves ventilator for introduction between rafters in existing roof spaces.

Data

  • PVC, clear or black.
  • Now available in two sizes.
  • REV600 for 600mm rafter spacing.
  • REV400 for 400mm and 450mm rafter spacing.
  • Suits numerous truss spacings.
  • Excellent free airflow.
  • Compatible with other ventilators.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards