Ventilation

Type CLV Circular Louvered Ventilator

  • Polypropylene
  • Size 79/70mm x 15mm - Requires 70mm hole
  • Free airflow 2100mm2
  • Louvers deflect driving rain and provide insect screening
  • Integral location grips
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

Type CLV Circular Louvered Ventilator

The Type CLV is popular in after-fit drill and vent applications. It can be introduced when the wet trades have finished. It differs from most circular ventilators as it has an airflow aperture rating of 2100mm2. The installer is required to drill fewer holes around the building, as fewer ventilators are required to provide the requisite levels of ventilation.

Example: If a small circular vent has a free area of 300mm, it would require seven such ventilators to equal the free area of one Type CLV. The Type CLV is commonly installed at 1.2m centres to fulfil ventilation requirements in typical applications and is offered in a range of masonry harmonising colours: Terracotta, Black, White, Buff and Brown. Projecting location grips hold the Type CLV in place when inserted into the drilled hole.

Use

Louvered ventilator that can be used to ventilate an existing cavity wall.

Data

  • Polypropylene
  • Size 79/70mm x 15mm - Requires 70mm hole
  • Free airflow 2100mm2
  • Louvers deflect driving rain and provide insect screening
  • Integral location grips
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards