Ventilation

Type W

  • Size 105/115mm x 65mm x
  • 10mm.
  • Free airflow 320mm².
  • Use every third or forth brick to
  • provide compliant balanced
  • ventilation.
  • BS polypropylene.
  • Colours:grey,black,beige,
  • brown,terracotta,white and
  • translucent.
  • Packaged in boxes containing
  • 50no.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

The Type W may be used to provide the balanced air conditions demanded within the cavity in timber-frame construction.The equivalent airflow of an open perp is required every 1.5 metres around the base of the cavity walls and around the top of the same walls. Where such wall cavities are closed or compartmented with the presence of horizontal fire stops or similar,ventilation apertures are required below and above such stops. Type W cavivents are designed for such purposes.Type W cavivents are available in a range of colours to blend with the adjacent mortar or masonry. To the front of each Type W is an insect resistant grille,whilst within the body of the ventilator are baffles to diffuse the effects of directly-blowing winds.Type W cavivents may be used to satisfy the requirements of cavity ventilation.

Use

Dual-function product acts as a cavity ventilator permitting the cavity to breathe.Also acts as a weep to evacuate water from lintels,dpc ’s and cavity trays.

Data

  • Size 105/115mm x 65mm x
  • 10mm.
  • Free airflow 320mm².
  • Use every third or forth brick to
  • provide compliant balanced
  • ventilation.
  • BS polypropylene.
  • Colours:grey,black,beige,
  • brown,terracotta,white and
  • translucent.
  • Packaged in boxes containing
  • 50no.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards