Radon

Service Pipe Entry Seals (top hats)

  • Sizes to suit pipes of approx 55mm, 110mm and 130mm.
  • Black/grey/pethylene/polyethlene.
  • For uses with compatible bonding tape/jubilee clip
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

Proformed Service Peope Entry Seals are manufactured in three popular sizes. Each is designed for use where an airtight seal is required around a soil pipe or a servise cable where it passes through the oversite membrane. When fitted and sealed in accordance with instructions, Service Pipe Entry Seals ensure membrane intergrity is not compromised so protection against damp and specified gases such as radon is maintained.

Use

To seal and make gas-tight where a service pipe or service cable passes through oversite membrane.

Data

  • Sizes to suit pipes of approx 55mm, 110mm and 130mm.
  • Black/grey/pethylene/polyethlene.
  • For uses with compatible bonding tape/jubilee clip
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards