Damp Proofing

Type F Corrugated Flashing

  • Profiles: Standard 3”/75mm asbestos, Standard 3”/75mm iron. Miniature, Grecca box profile 76/18, Grecca box profile 70/18, Box profile 16mm, Box profile 14mm.
  • Approximate dimensions 150mm x 85mm upstand x 715mm lengths.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

 The new Type F corrugated flashing units can be used on porches, lean-tos, outhouses, conservatories or temporary structures having lightweight translucent corrugated roof sheeting. The Type F flashing unit incorporates a unique integral hinge, usually making it suitable for any angle of roof from 17.5 degrees up to and including 60 degrees. The units are fixed simply by positioning before securing the top of sheet fixings, which then hold the units in place. The Type F fits against the corrugations snugly, whilst the upstand springs to shape vertically against the wall. The upstand can then be finished off with a flashing/cavitray.

Use

Corrugated flashing suitable for use with plastic roof sheets only.

Data

  • Profiles: Standard 3”/75mm asbestos, Standard 3”/75mm iron. Miniature, Grecca box profile 76/18, Grecca box profile 70/18, Box profile 16mm, Box profile 14mm.
  • Approximate dimensions 150mm x 85mm upstand x 715mm lengths.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards