Damp Proofing

Pyramid Weep (Masonry bleed straw)

  • Size: 100mm x 8mm x 8mm x 8mm.
  • Sizes: 225mm x 8mm x 8mm x 8mm.
  • (May be cut to provide alternative lengths.)
  • Polpropylene.
  • Mortar grey colour.
  • Flush Front.
  • Direct bled path.
  • Packaged in 100 and 500.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

Pyramid Weeps (or masonry bleed straws as they are sometimes termed) permit decreet evacuation of water arrested within cavity wall. The pyramid profile is rarely noticeable when incorporated within a standard mortar bed. If undersized or reduced gauging is encountered, the triangular shape permits the weep to still be positioned within the bedding mortar but with its peak rising into a vertical perp joint. The Pyramid Weep is avaliable in two sizes to suit masonry skins up to a thickness of 225mm. Pyramid Weeps may be appropriately positioned at regular intervals in normal situations and applications to provide discreet and consistent discharge routes.

Use

To provide discharge route for water from lintels, damp courses, cavity trays etc.

Data

  • Size: 100mm x 8mm x 8mm x 8mm.
  • Sizes: 225mm x 8mm x 8mm x 8mm.
  • (May be cut to provide alternative lengths.)
  • Polpropylene.
  • Mortar grey colour.
  • Flush Front.
  • Direct bled path.
  • Packaged in 100 and 500.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards