Associated Items

Contract Hardedge

  • Rigid pvc, black / grey
  • 1500mm x 240mm Approx (Overall).
  • Suitable for use on roof pitches from 15 degrees up to 45 degrees.
  • Provides even support to address anti-pooling.
  • Projecting lip promotes correct felt positioning and discharge of water.
Send us an enquiry about this product or give us a call for free:
0800 7311 779
Open Hours: Mon to Fri 8:00am - 5:00pm

Introduction

Underlay felt should discharge water into the eaves gutter.This requirement is often flawed,and pooling of water is experienced within the sagging felt area, situated behind the fascia board. The Contract Hardedge anti-pooling strip addresses this aspect. The Contract Hardedge anti-pooling strip is a rigid preformed pvc profile,which is positioned at eaves level prior to the laying of the roofing underlay felt. It provides support of the underlay felt which is positioned and laid in the conventional manner. The underlay felt is prevented from sagging between rafters/tilting fillets,thus addressing the pooling problem.

Use

Provides robust support and reinforcing of roofing felt at eaves.

Data

  • Rigid pvc, black / grey
  • 1500mm x 240mm Approx (Overall).
  • Suitable for use on roof pitches from 15 degrees up to 45 degrees.
  • Provides even support to address anti-pooling.
  • Projecting lip promotes correct felt positioning and discharge of water.
You can buy our products at:

Products available from your local merchant, contact us to find out who is in your area

Contact us
All you need to know about Cavity Tray Standards